The procedure itself is fairly simple and everyone can learn it.
Do not take your computer to a expensive services for something you can do yourself in half an hour.
Step 1 preparation
First thing you need a Windows 7 installation DVD, and the corresponding computer.
These are some of the minimum hardware requirements for installing Windows 7
1 GHz 32-bit or 64-bit processor
1 GB RAM
16 GB of space on the HDD
Support for DirectX 9 if you run Aero
DVD-R / W ROM
Internet access to update
Although I recommend you at least a dual core processor and some 2 GB DDR2 memory that allows you to work slightly.
Step 2 Set your BIOS
It is necessary to set the BIOS to boot from your system
CD / DVD drive.
To enter a BIOS setup you need to power up your pc PC and push buttons del or f2 on your keybord
When you appear in blue window means that you are in BIOS
example 1
example 2
Depending on your BIOS version your bios may look slightly different.
Find the Settings area of the "Advanced BIOS Features" or something similar depending on your BIOS and set it First Boot DVD ROM (CD ROM)you can change order by pushing button + or - on your keybord
Or just Press ENTER the cd / dvd and put it in the first place
example:
Find the Settings area of the "Advanced BIOS Features" or something similar depending on your BIOS and set it First Boot DVD ROM (CD ROM)you can change order by pushing button + or - on your keybord
Or just Press ENTER the cd / dvd and put it in the first place
example:
example 2:
When you set up that CD / DVD drive is on the first place save your changes.
Now insert your Windows 7 DVD into the computer and restart computer.
Step 3 Install Windows 7
Step 3 Install Windows 7
When you prepare your computer to boot from DVD you are rady for instalation
The installation DVD is inserted into the DVD ROM drive, restart your computer and the system boots. The first screen is similar to this one in the picture below.
No you press any key on your keybord and setup will start.
WARRING
You do that only the first time. You will see that screan several times during the instalation but newer push a buton again because you will restart the setup.
When you press the button you come to a new screen that reads data from the Windows DVD. 
When you press the button you come to a new screen that reads data from the Windows DVD.
Then will come starting win:
The next screen displays the settings for installation language, time zone and set the keyboard depending on the region .That you can set according to your needs.
Set parameters as desired and click Next.
At the next screen you have the opportunity for some information, but we are now interested in installing and we click on the Install Now button
At the next screen you have the opportunity for some information, but we are now interested in installing and we click on the Install Now button
The next screen shows Starting Setup that can take a long time depending on your hardver.
At the next screen you need to "read" the license conditions and confirm that you understand them. So Check the box in front of the "I accept the license terms"
At the next screen you need to choose an installation type. In this case, install a clean Windows 7, so we choose the bottom option (Custom Advanced)
At the next screen appears to us to show our hard drives. I am in this case I have a HDD and shows his greatness. Note the options below (Refresh, Drive options, Load driver). Click on Drive Options (Advanced)
Depending on the number of partitions can be up that you have multiple discs.
Format the partition where you want to install windows.
Format the partition where you want to install windows.
At the next screen setup installation warns us about formatting partitions and erase all data on it. Click on OK
At the next screen installation will start. The course of the installation will take some time and this time do not touch anything until the installation is completed. In one particular part of the setup computer will restart automaticly and continue to install afther that..
After a long wait the computer will reboot and re-appear this screen as shown below.
NOTE: DONT TOUCH ANITHING ON KEYBOARD
NOTE: DONT TOUCH ANITHING ON KEYBOARD
Computer installation continues and the first screen appears
At the next screen appears "complete the installation"
The following screen appears in which you announce that the installation will continue after reboot. Again, we do not touch anything on the keyboard.
Now we come to screen where where we setup Windows 7 set for its first use.
After adjustment for the first use appears to us to screen where you must enter
- The name of the user (users) administrator account that is our account
- Computer name. The computer name will be displayed if we put aour computer in a network.
After adjustment for the first use appears to us to screen where you must enter
- The name of the user (users) administrator account that is our account
- Computer name. The computer name will be displayed if we put aour computer in a network.
It appears to us a new screen where you must enter the password for entry into our acount (account) who is an administrator.
At the next screen, type the license number (product key). Turn ie Check the box to activate Windows 7 when you are online on the Internet.
At the next screen click on "Use recommended settings"
At the next screen we have setup o our desktop
After instalation:
First Install all necessary drivers (desirable?)
Second Set the screen resolution as well as other little things you're used to or want. (Of course here is a GUI interface differently than previous Windows, but if you worked in Vista will not be difficult to manage.
Second Set the screen resolution as well as other little things you're used to or want. (Of course here is a GUI interface differently than previous Windows, but if you worked in Vista will not be difficult to manage.
Good luck
